lunes, 22 de octubre de 2012

Micro-Dandelion Construction Manual.


Tools and materials:
  • pliers (cutting and edge)
  • rule.
  • gotita (glue)
  • silicone gun.
  • dremel
  • Phillips screwdriver.


    Base Toy.




Parts.
Solar panel.

Motor gears.

Base toys.


Micro-dandelion wheel.

Step 1: Disassemble parts to used.

Step 2: Removing excess plastic.

Step 3: Cut a solar panel wire, welding a switch to cut wire.


Step 4: Mount A in part C.

Step 5: Mount gear F1 under part A with the metal pin that comes with the screws.


Step 6: Mount one of the gear F2 next to gear F1.


Step 7: Mount the remaining gear F2 above gear F1.



Step 8: Mount F3 above the first F2 gear used.


Step 9: Mount B above C.

Step 10: Screw the two extremes of B and C with the screws that come in the toy.

Step 11: Paste the solar panel on top of the toy with adhesives that come in the toy.


Step 12: With the piece G pass a copper wire through 2 opposite holes (Repeat for the second wheel). Asks for help to instructor of you have doubts.


Step 13: Ensures copper wire in G with silicone and paste above D (repeat with E).


Step 14 : Each leg of Micro-dandelion must measure 5 cm (from the edge of the plastic),if exist a excess, cut the wire with a pliers.

Step 15: With the resulting copper wire in G mold the legs as instructor teaches you.


Step 16: Mount the wheels E and D to the pin of the toy base ( B and C), paste with gotita(glue) if necessary.


Step 17: Paste a wire tail to the Micro-dandelion (size choice)


Step 18: Paste the switch with silicone in the back side of the toy.


Step 19: Advises instructors to test if work your Micro-dandelion with the foci.


Micro-Dandelion test in MMArs